RIDGID 1822-I Operator's Manual Page 16
- Page / 71
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1822-I Pipe and Bolt Threading Machine
Threading 2
1
/
2
″ to 4″ Pipe (45 RPM)
(Figure 16)
1. Adjust No. 141 Geared Threader and install.
2. Support pipe with a pipe stand.
3. Insert pipe into the throat of dies and tighten
workholder and clamp screw.
4. Direct oil spout at dies and place oil manifold lever
in required position.
5. Place control switch in the CLOSE (1) position
and with transmission lever in the 45 RPM posi-
tion, depress foot switch.
6. Thread until the RED STOP line appears on pinion
sleeve (Reference the guide post markings for
oversized or undersized threads, Figure 15).
7. To back off threader, place control switch in the
OPEN (2) position and depress foot switch.
8. After
1
/
4
turn, stop machine, pull cam plate knobs,
and rotate cam plate toward CD mark of die head.
9. Loosen clamp screw and open workholder.
Remove the pipe.
10. Depress foot switch and reset No. 141 to
STANDARD line.
CAUTION
If threaded barrel becomes disengaged from
workholder, it must be reengaged by hand on a
workbench. DO NOT use power.
Ridge Tool Company • Elyria, Ohio • U.S.A.
14
No. 821 Blade Cutter and
No. 822 Adapter Kit
No. 821 Blade Cutter allows the machine to groove,
bevel and produce square end cuts for lined pipe and
other applications. Installation requires a No. 822
Adapter Kit. The kit includes a cutter attaching arm, oil
supply manifold and manifold clamp/drip tray.
Installation of No. 821 Blade Cutter
1. Remove standard No. 364 Wheel Cutter from car-
riage.
2. Install attaching arm and No. 821 Blade Cutter.
3. Disconnect plastic oil supply line and metal fitting
from carriage.
4. Attach metal manifold supply line to carriage, install
manifold and manifold clamp/drip tray.
5. Reattach plastic oil supply line to manifold.
Cut Grooving, Beveling and Cut-Off with
No. 821 Blade Cutter (45 RPM)
1. Chuck pipe and place oil supply lever in the posi-
tion required to direct cutting oil to flexible oil spout.
2. Install tool bit required for desired operation.
3. Place cutter over pipe and with machine in opera-
tion, tighten cutter handle until rolls engage pipe.
4. Direct oil spout to the cutting surface and slowly
turn tool feed handle.
Figure 16 – Operation of the No. 141 Geared Threader
Oil Spout
Connecting
Link
Oil Manifold/Lever
(Hidden)
Drive Shaft
(Set Screws)
Guide Post
Workholder
Clamp Screw
Pipe
VJ-99 Pipe
Stand
Handwheel
Carriage
Saddle
Pinion Sleeve
- Pipe and Bolt 1
- Threading Machine 1
- Table of Contents 2
- Pipe and Bolt Threading 3
- General Safety Information 4
- Specific Safety Information 5
- ▲ WARNING 6
- Standard Equipment: 7
- Accessories 7
- Die Heads and Dies 7
- Machine Dimensions and 8
- Bench/Stand Mounting 8
- Performance Tips 8
- Folding Wheel Stand 9
- Know Your Machine 10
- Machine Operation Using 11
- Standard Equipment 11
- Self-Opening Die Head 12
- Cut-Off and Reaming Tips 12
- Speed Selection 12
- Model 1822-I 12
- Threading Pipe with No. 815A 12
- Automatic Pipe Release 13
- Changing Dies 13
- No. 819 Nipple Chuck and 14
- No. 839 Adapter Kit 14
- Adjusting No. 141 Geared 14
- Threader 14
- Operating No. 141 Geared 15
- Mount Kit 15
- No. 821 Blade Cutter and 16
- No. 822 Adapter Kit 16
- No. 1460 Oil Pan Cover Kit 17
- Installation 17
- Maintenance 18
- Spindle Conversion Kit for 19
- Plastic Coated Pipe 19
- Service & Repair 20
- Left Hand Machine Operation 20
- Operation 21
- Left Hand Operation 21
- 1822-IC 22
- Machine à fileter les tuyaux 23
- Table des matières 24
- Consignes de sécurité 25
- Réparations 26
- ▲ MISE EN GARDE 27
- Description 28
- Spécifications 28
- Equipements de base : 29
- Accessoires 29
- Dimensions de la machine et 30
- Conseils d’utilisation 30
- Figure 7 – Coupe-tubes N 33
- Remplacement des filières 35
- Mandrin à raccords N 36
- Réglage de la fileteuse 37
- Utilisation de la fileteuse 38
- 141 avec le kit 38
- Utilsation 40
- Entretien 41
- Dépose de l’arbre 42
- Entretien et Réparations 43
- Schémas électriques 46
- 1822-I Máquina Roscadora 47
- NO SE RECOMIENDA 49
- Seguridad personal 50
- Servicio 50
- ▲ ADVERTENCIA 51
- Descripción, Especificaciones 52
- Equipo estándar: 53
- Accesorios 53
- Dimensiones de la máquina y 54
- Recomendaciones para 54
- No. 1404 55
- Funcionamiento de la máquina 56
- Figura 7 – Cortadora No. 364 57
- Selección de velocidades 58
- Modelo No. 1822-I 58
- Cambio de terrajas 59
- Portaherramientas Niplero No 60
- 819 y Juego Adaptador No. 839 60
- Regulación de la Roscadora de 61
- Engranajes No. 141 61
- Funcionamiento de la 62
- Roscadora a Engranajes No 62
- 141 con el Juego No. 241 para 62
- Montaje en el Carro 62
- Cortadora de Cuchilla No. 821 63
- Instalación 64
- Mantenimiento 65
- Juego transformador del 67
- Servicio y reparaciones 68
- Ventilador 70
- LIFETIME WARRANTY 71
- GARANTIE A VIE 71
- GARANTIA DE POR VIDA 71
Related products and manuals for Sewing machines RIDGID 1822-I
(79 pages)
Sewing machines Ridgid 1210 User Manual
(2 pages)
(2 pages)
Sewing machines Ridgid 300 User Manual
(1 pages)
(1 pages)
Sewing machines Ridgid 1233 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 1.397 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals