Ridgid micro EXPLORER User Manual download pdf (Page 8)

3. Battery removal and installation.

A. To remove the battery pack, tilt unit

slightly to slide battery into other hand.

B. To install the battery, Insert contact

end of rechargeable battery pack into

the microEXPLORER inspection cam-

era, as shown in

Figure 3

.

4. Replace battery cover

(Figure 2)

and

snap into place by sliding the lock button

to the middle and releasing to engage the

lock.

Installing the Imager Head

Cable

To use the microEXPLORER inspection cam-

era

,

the imager head cable must be con-

nected to the handheld display unit. To con-

nect the cable to the handheld display unit,

make sure the key and slot

(Figure 4)

are

properly aligned. Once they are aligned, finger

tighten the knurled knob to hold the con-

nection in place.

Figure 4 – Cable Connections

3' and 6' cable extensions are available to

increase the length of your cable up to 30' in

length. To install an extension, first remove the

camera head cable from the display unit by

loosening the knurled knob. Connect the ex-

tension to the handheld as described above

(Figure 4)

. Connect the keyed end of the

camera head cable to the slotted end of the

extension and finger tighten the knurled knob

to hold the connection in place.

To Install Camera Accessories

The three included accessories, (mirror, hook

and magnet)

(Figure 1)

all attach to the imager

head the same way.

To connect, hold the imager head as shown in

Figure 5

. Slip the semicircle end of the ac-

cessory over the flats of the imager head as

shown in

Figure 5

. Then rotate the accessory

a 1/4 turn so the long arm of the accessory is

extending out as shown

(Figure 6)

.

microEXPLORER

™

DigitalInspection Camera

Ridge Tool Company

6

Figure 5

Figure 6 – Installing Accessories

To install an SD Card

Using the tab on the port cover

(Figure 7)

, lift

and pull to remove the cover and expose the

SD card slot. Insert the SD card into the slot

making sure the contacts are facing towards

you and the angled portion of the card is facing

down. When an SD card is installed, a small

SD card icon will appear in the bottom right

hand portion of the screen, along with the

number of images or length of video that can

be stored on the SD card.

Buttons, Controls and Ports

Figure 7 – Port Cover

Slot

Key

Imaging Head

Accessory

Flats

SD Card

Slot

Mini USB Port

Additional

Accessory

Ports

Expansion

Bay Door

For Other

Accessories

ON/OFF

Button

(Sold Separately)

Port

Cover

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 448 449

Comments to this Manuals

No comments