Ridgid micro EXPLORER User Manual download pdf (Page 19)

microEXPLORER

™

Digital Inspection Camera

Battery and Charger

Battery Pack/Battery Charger

Safety

WARNING

To reduce the risk of serious injury, read

these precautions carefully before using

the battery charger or battery.

Battery Charge Safety

• Charge only the RIDGID rechargeable

battery listed in the

Accessories Sec-

tion

with the RIDGID Battery Charger

(Catalog Number 30758). Other types of

batteries may burst causing personal injury

and property damage.

• Do not probe battery charger with con-

ductive objects. Shorting of battery termi-

nals may cause sparks, burns or electrical

shock.

• Do not insert battery into charger if

charger has been dropped or damaged

in any way. A damaged charger increases

the risk of electrical shock.

• Charge battery in temperatures above

41 degrees F ( 5 degrees C) and below

113 degrees F (45 degrees C). Store

charger and battery pack in temperatures

above -40°F (-40°C) and below 104°F

(40°C). Storage for a long time at tem-

peratures above 104F can reduce the ca-

pacity of the battery. Proper care will pre-

vent serous damage to the battery.

Improper care of the battery may result

battery leakage, electrical shock and burns

Ridge Tool Company

17

• Use an appropriate power source. Do

not attempts to use a step-up transformer

or an engine generator. Doing so may

cause damage to the charger resulting in

electrical shock, fire or burns.

• Do not allow anything to cover the

charger while in use. Proper ventilation is

required for correct operation of the char-

ger. Allow a minimum of 4" (10 cm) of

clearance around the charger for proper

ventilation.

• Unplug the charger when not in use.

Reduces the risk of injury to children and

untrained persons.

• Unplug the charger from outlet before

attempting any maintenance or clean-

ing. Reduces the risk of electrical shock.

• Do not charge battery pack in damp,

wet or explosive environment. Do not

expose to rain, snow or dirt. Contaminants

and moisture increase the risk of electrical

shock.

• Do not open the charger housing. Have

repairs performed only at authorized lo-

cations.

• Do not carry charger by power cord.

Reduces the risk of electrical shock.

Battery Safety

• Properly dispose of the battery. Expo-

sure to high temperatures can cause the

battery to explode, so do not dispose of in

a fire. Place tape over the terminals to

prevent direct contact with other objects.

Some countries have regulations concern-

ing battery disposal. Please follow all appli-

cable regulations.

SYMPTOM POSSIBLE REASON SOLUTION

Display turns ON, but

does not show image.

LEDs on imager head

are dim at max bright-

ness, display switches

between black and

white, color display

turns itself OFF after a

brief period.

Unit will not turn ON.

Troubleshooting

Loose cable connections.

Imager head covered by debris.

Battery low on power.

Dead battery.

Check cable connections, clean if re-

quired. Re-attach.

Visually inspect imager head to make

certain it is not covered by debris.

Charge battery.

Charge battery.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 448 449

Comments to this Manuals

No comments