Ridgid micro EXPLORER User Manual download pdf (Page 4)

General Safety

Information

WARNING

Read and understand all instructions.

Failure to follow all instructions listed

below may result in electric shock, fire

and/or serious personal injury.

SAVE THESE INSTRUCTIONS!

Work Area Safety

• Keep your work area clean and well lit.

Cluttered benches and dark areas may

cause accidents.

• Do not operate electrical devices in ex-

plosive atmospheres, such as in the

presence of flammable liquids, gases,

or heavy dust. Electrical devices create

sparks which may ignite the dust or fumes.

• Keep bystanders, children, and visitors

away while operating electrical devices.

Distractions can cause you to lose control.

Electrical Safety

• Electrical device plug must match the

outlet. Never modify the plug in any

way. Do not use any adapters with

microEXPLORER

™

DigitalInspection Camera

Ridge Tool Company

earthed (grounded) power tools. Un-

modified plugs and matching outlets will

reduce the risk of electric shock.

• Avoid body contact with earthed or

grounded surfaces such as pipes, radi-

ators, ranges and refrigerators. There is

an increased risk of electrical shock if your

body is earthed or grounded.

• Do not expose electrical devices to rain

or wet conditions. Water entering an

electrical device will increase the risk of

electrical shock.

• Do not abuse the cord. Never use the

cord for carrying, pulling, or unplugging

the electrical device. Keep cord away from

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the

risk of electrical shock.

• When operating an electrical device

outdoors, always use an extension cord

suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of

electric shock.

• If operating an electrical device in a

damp location is unavoidable, use a

ground fault circuit interrupter (GFCI)

protected supply. Use of a GFCI reduces

the risk of electrical shock.

Safety Symbols

In this operator’s manual and on the product, safety symbols and signal words are used to

communicate important safety information. This section is provided to improve under-

standing of these signal words and symbols.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey

all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous situation which, if not avoided, will result in death or

serious injury.

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could result in minor

or moderate injury.

NOTICE indicates information that relates to the protection of property.

This symbol means read the operator’s manual carefully before using the equipment. The op-

erator’s manual contains important information on the safe and proper operation of the equip-

ment.

This symbol means always wear safety glasses with side shields or goggles when handling

or using this equipment to reduce the risk of eye injury.

This symbol indicates the risk of hands, fingers or other body parts being caught or wrapped

in gears or other moving parts.

This symbol indicates the risk of electrical shock.

NOTICE

WARNING

CAUTION

DANGER

1 2 3 4 5 6 7 8 9 ... 448 449

Comments to this Manuals

No comments

Ridgid micro EXPLORER User Manual Page 4

Comments to this Manuals

Related products and manuals for Power tools Ridgid micro EXPLORER