RIDGID GP90135 Operator's Manual download pdf (Page 10)

Fr15

Pour remplacer un filtre, enlever le

couvercle du carter de filtre. Si l’élément

du filtre est sale, remplacer l’élément ou

tout le filtre.

Enlevage, Inspection et Remplacement du Filtre

Les réservoirs doivent être inspectés

attentivement au moins une fois l’an.

Rechercher les fissures près des

soudures. Si une fissure est visible,

dissiper la pression du réservoir

immédiatement et le remplacer.

Réservoir

Ne jamais essayer de réparer ni

de modifier un réservoir! Le

soudage, perçage ou autre

modifications peuvent affaiblir

le réservoir et peuvent résulter

en dommage de rupture ou

d’explosion.Toujours remplacer

un réservoir usé, fendu ou

endommagé.

DANGER:

!

Drainer chaque jour le liquide

des réservoirs.

AVIS:

Vidange du

réservoir (2)

Pour Ouvrir

All lubricated compressor pumps dis-

charge some condensed water and oil

with the compressed air. Install appropri-

ate water/oil removal equipment and con-

trols as necessary for the intended appli-

cation.

10

Operating Your Air Compressor

Before starting the compressor,

thoroughly read all component

instruction manuals, especially

the engine manual.

NOTICE:

Failure to install appropriate

water/oil removal equipment

may result in damage to

machinery or workpiece.

NOTICE:

Drain liquid from tank daily.

NOTICE:

Do not attach air tools to open

end of the hose until start-up is

completed and unit checks OK.

!

CAUTION:

Moisture in Compressed Air

Moisture in compressed air will form into

droplets as it comes from an air compres-

sor pump. When humidity is high or when

a compressor is in continuous use for an

extended period of time, this moisture will

collect in the tank. When using a paint

spray or sandblast gun, this water will be

carried from the tank through the hose,

and out of the gun as droplets mixed with

the spray material.

IMPORTANT: This condensation will

cause water spots in a paint job, especial-

ly when spraying other than water based

paints. If sandblasting, it will cause the

sand to cake and clog the gun, rendering

it ineffective.

Afilter in the air line, located as near to the

gun as possible, will help eliminate this

moisture.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments