RIDGID JP0600 Specifications download pdf (Page 10)

Unpacking and Checking Contents

Tools Needed

Unpacking

WARNING: To reduce the risk of injury from unex-

pected starting or electrical shock, do not plug the

power cord into a power source outlet during

unpacking, until all assembly steps are complete,

and you have read and understand the safety and

operating instructions.

WARNING: This tool is heavy. To reduce the risk of

back injury, get help whenever you have to lift the

tool.

Your jointer/planer is shipped complete in one carton and

includes a steel cabinet.

1. Clear yourself a large work area. Remove the jointer/

planer and parts from the carton. Lift the tool at the

bottom of the base.

2. Place the tool on a secure, stationary work surface and

look it over carefully.

3. Separate all parts from packing materials and check

each one with the “Table of Loose Parts” and the “List

of Loose Parts” to make certain all items are

accounted for before discarding any packing material.

If you are missing any parts, check packing material for

those items.

WARNING: If any parts are missing, do not attempt

to assemble the jointer/planer. Do not plug in the

power cord or turn the switch on until the missing

parts are obtained and are installed correctly.

4. Contact an Authorized Service Center to get the miss-

ing parts. Use the “Repair Parts” pages at the end of

this manual to identify the part number of the missing

parts after completing the “Unpacking and Checking

Contents section.

CAUTION: The cutting knives are extremely sharp.

Do not touch the cutter knives.

5. The top of the table and the front of the fence are

coated with a protective substance before shipping.

These surfaces must be cleaned and protected before

using the jointer/planer. Clean these surfaces with a

general purpose solvent, such as mineral spirits. Water

will rust the surfaces. Do Not use water, soapy water or

water based cleaners.

CAUTION: Use solvents according to the instruc-

tions on their package. Use only in well ventilated

areas, away from flames, sparks or heat sources.

Do not use solvents in closed areas.

6. Protect the exposed surfaces with wax. Paste wax or

automotive wax are both good for this job. The wax will

protect the surface from rust and will make it easier to

slide the wood along the table and fence. Automotive

wax is best as it will not rub off on the wood.

7. Wipe all parts thoroughly with a clean, dry cloth.

List of Loose Parts

NOTE: Before beginning assembly, check that all parts

are included. If you are missing any part, do not assem-

ble the tool. Call 1-800-4-RIDGID or E-mail us at

info.@ridgidwoodworking.com to get the missing part.

Sometimes small parts can get lost in packaging mate-

rial. Do not throw away any packaging until jointer/

planer is put together. Check packaging for missing

parts before contacting RIDGID. A complete parts list

(Repair Parts) is at the end of the manual. Use the list

to identify the number of the missing part.

The following parts are included:

Item Part Name Qty.

A Jointer Bed Assembly..................................... 1

B Fence Assembly ............................................. 1

C Motor Assembly w/Switch............................... 1

D V-Belt .............................................................. 1

E Push Blocks.................................................... 2

F Top Panel........................................................ 1

G Left Side Panel ............................................... 1

H Right Side Panel............................................. 1

J Front Panel ..................................................... 1

K Rear Panel...................................................... 1

L Motor Mount Plate .......................................... 1

M Motor Mount Sides ......................................... 2

N Sawdust Chute ............................................... 1

P Cutter Guard................................................... 1

Q Pulley Guard................................................... 1

R Handwheel ..................................................... 1

S Cover.............................................................. 1

T Owners Manual .............................................. 1

U Bag Loose Parts..............................................*

* Quantity of bag may vary, bags may contain

smaller bags.

2 Ft. Straight Edge

Phillips Screwdriver

Combination

Square

(12"Blade)

Select the straight edge of a board.

Draw light line on

board along edge

This edge must be perfectly straight.

Should be no gap or overlap here when

square is flipped over in dotted position

Adjustable Wrench

Combination square must be true. Check its

accuracy as shown

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments

RIDGID JP0600 Specifications Page 10

Comments to this Manuals

Related products and manuals for Unknown RIDGID JP0600