RIDGID JP0600 Specifications download pdf (Page 16)

Assembly (continued)

Assembling Cabinet Top to Cabinet

1. Locate the following:

13 Machine Screws with Washer Heads

2. Place cabinet top upside down on the floor.

3. Position the assembled cabinet upside down on the

cabient top.

4. Fasten in place with 9 machine screws.

5. Fasten chute to cabinet side with 4 machine screws.

6. Turn assembled unit right side up on leveling feet.

Assemble Bed to Stand

1. From among the loose parts, find the following:

3 Jointer Mounting Stud 3/8-16 x 3/4

3 Lockwasher 3/8

1 Handwheel

1 Screw Pan Head 1/4-20 x 1/2

1 Washer 1/4

1V-Belt

WARNING: This tool is heavy. To reduce the risk of

back injury, get help whenever you have to lift the

tool.

2. Set the bed on top of the stand. Carefully line up the 3

threaded holes in the bed with the 3 slots in the stand.

Attach the 3 studs and lockwashers and tighten.

3. Slip the V-belt over the bed pulley. Lift the motor up

and slip the V-belt around the motor pulley.

Note: Allow the weight of the motor to tension the belt.

No additional tension is required. Visually line up the

motor pulley with the bed pulley and tighten the motor

mounting nuts.

4. Slip the handwheel onto the infeed table elevation

shaft and install the washer and screw.

Machine

Screws

Machine Screw w/Washer Head

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

No comments

RIDGID JP0600 Specifications Page 16