RIDGID RP 330-B Operator's Manual download pdf (Page 6)

result in extensive property damage, severe per-

sonal injury, or death.

• Charge batteries only in the appropriate battery

charger as specified in the charger manual. Other

types of batteries or non-rechargeable batteries may

burst resulting in personal injury and damage.

• Do not probe battery with conductive objects.

Shorting of battery terminals may cause sparks, burns

or electrical shock.

• Do not insert battery with cracked case into tool or

charger. Do not operate battery if it has been drop-

ped or damaged in any way. Damaged battery

increases the risk of electrical shock.

• Do not burn batteries for any reason. Batteries

explode in fire.

• Charge batteries in temperatures above +41°F

(+5°C) and below +113°F (45°C). Store tool and

battery pack in locations where temperatures will

not exceed +104°F (40°C). Proper care will prevent

serious damage to batteries. Improper care of batteries

may result in battery leakage, electrical shock or burns.

• Do not allow anything to cover the charger while in

use. May result in fire.

• Unplug the charger when not in use. Reduces risk

of injury to children and untrained persons.

• Do not charge battery in damp or wet environ-

ment. Do not expose to rain or snow. Increases the

risk of electrical shock.

• Do not open the charger. Have repairs done only by

authorized experts.

Description, Specifications and

Standard Equipment

Description

The RP 330 Pressing Tool, when used with appropriate

jaw sets, is designed to mechanically press fittings onto

tubing to create a water-tight and permanent seal. When

the switch on the RP 330 is depressed, an internal elec-

tric motor powers a hydraulic pump which forces fluid

into the cylinder of the tool, forcing the ram forward and

applying thousands of pounds of pressing force onto

specially designed fittings. Attachments are also available

for other uses.

The entire cycle duration is approximately five (5) seconds.

Once the cycle begins to deform a fitting, it will automat-

ically continue until completion, even if the trigger switch

is released. The LED displays on the back of the tool indi-

Specific Safety Information

WARNING

This section contains important safety information that is

specific to this tool.

Read these precautions carefully before using the RP 330

Pressing Tool to reduce the risk of electrical shock or seri-

ous personal injury.

SAVE THESE INSTRUCTIONS!

A compartment in the RP 330 carrying case is included to

keep this manual with the machine for use by the operator.

Pressing Tool Safety

• Use the RP 330 Pressing Tool only with RIDGID

Standard pressing attachments (jaw set, press

ring, actuator, etc.). Other uses or modifying the RP

330 Pressing Tool for other applications may damage

the pressing tool, damage the attachments and/or

cause personal injury.

• Keep your fingers and hands away from jaws dur-

ing press cycle. Your fingers or hands can be

crushed, fractured or amputated if they become caught

between the jaws or between these components and

any other object.

•

ever attempt to repair a damaged jaw set, press

ring, actuator or other attachment. An attachment

that has been welded, ground, drilled or modified in

any manner can shatter during pressing resulting in

serious injury. Discard the entire damaged jaw set.

Replace with a new jaw set. Never replace individual

components except for damaged jaw return springs.

• Read and understand this operator’s manual, the

jaw set instructions, the fitting manufacturer’s

installation instructions and the instructions for

any other equipment used with this tool before

operating the RP 330. Failure to follow all instructions

may result in property damage and/or serious per-

sonal injury.

Battery and Charger Safety

(for RP 330-B only)

WARNING

Read the battery charger manual before using the

charger or batteries. Failure to read, understand and

follow the contents of the charger manual may

RP 330 Pressing Tool

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

RIDGID RP 330-B Operator's Manual Page 6

Comments to this Manuals

Related products and manuals for Power tools RIDGID RP 330-B