RIDGID RP 330-B Operator's Manual

Pressing ToolWARNING!Read this Operator’s Manualcarefully before using thistool. Failure to understandand follow the contents ofthis manual may result

Figure 6 – Opening The Scissor-Style Jaw SetFigure 7 – Placing Scissor-Style Jaw Set Around FittingFigure 8 – RP 330 Tool Square To Tubing7. Make sure

Figure 11 – Pressure Release ButtonInspecting The Pressed Connection1. Inspect the pressed fitting. If the fitting is supplied witha control ring and/

ature within the operating range by placing it in a condi-tioned room for several minutes before use. This will beindicated by a red glowing LED on th

Ridge Tool Company 11RP 330 Pressing ToolSYMPTOM POSSIBLE REASONS SOLUTIONTool will not turn ONwhen ON/OFF button ondisplay panel is pressed.Tool turn

12RP 330 Pressing ToolRP 330 Diagnostic CodesLED Status DescriptionGreenGlows Tool ON.Blinks Out of acceptable voltage range— Cordless Tools: Replace

iiRP 330 Pressing ToolTable of ContentsRecording Form for Machine Serial Number...

RP 330 Pressing ToolRecord Serial Number below and retain product serial number which is located on nameplate.SerialNo.Pressing ToolRP 330RP 330-B Bat

Ridge Tool Company2RP 330 Pressing ToolGeneral Safety Rules*WARNINGRead all safety warnings and instructions. Failure to followthe warnings and instru

Ridge Tool Company 3Personal Safety• Stay alert, watch what you are doing and use com-mon sense when operating a power tool. Do notuse a power tool wh

result in extensive property damage, severe per-sonal injury, or death.• Charge batteries only in the appropriate batterycharger as specified in the c

NOTE! RIDGID jaw sets are offered in two “series”• Standard Series• Compact SeriesThese jaw sets are not interchangeable. That is,only standard series

4. Inspect and maintain the tool attachments and batterycharger as directed in their instructions. Failure toproperly inspect and maintain attachments

Ridge Tool Company 7attachment during the press cycle. Your fingers orhands can be crushed fractured or amputated inthe attachment or tool or between