Ridgid Seesnake Micro User Manual download pdf (Page 7)

Ridge Tool Company

Tools For The Professional

SeeSnake Micro™

When in use, the snake should easily maneuver itself into position going

forward.

TIP! The cable can be bent into a certain shape. This may help you maneuver

the cable into tight areas.

NOTE! The SeeSnake Micro™ was not designed to take the place of a drain

cleaner or electrical/plumbing sh sticks or tapes. In limited instances, the

SeeSnake Micro™’s accessories can be used to retrieve small items like

dropped rings or screws.

Transportation & Storage

1. Avoid exposing the unit to continuous vibration or extreme hot and cold

temperatures.

2. Always store the SeeSnake Micro™ indoors in the case it came with.

3. Always remove the batteries if the unit will not be used for an extended

period of time.

Maintenance Instructions

CAUTION: Make sure the batteries have been removed from the unit before

performing maintenance.

The SeeSnake Micro™ has been designed to require little maintenance.

However, in order to maintain its performance, you must always follow these

guidelines:

Always handle the device with care. It is not shock-resistant and should

not be banged or dropped. Treat it as you would any other sensitive opti-

cal device.

2. Always clean the imager head after use with soap and mild detergent.

3. Use only alcohol swabs to clean the connections.

4. Avoid rubbing too hard on the LCD. After use, wipe the display clean

gently with a dry cloth.

5. Do not disassemble this device beyond what is shown in the manual.

Doing so will void your warranty.

Service and Repair

CAUTION: Tool should be taken to a RIDGID Independent Authorized Service

Center or returned to the factory. All repairs made by Ridge service facilities

are warranted against defects in material and workmanship.

If you have any questions regarding the service or repair of this machine, call

or write to:

Ridge Tool Company

Technical Service Department

400 Clark Street

Elyria, Ohio 44035-6001

Tel: (800) 519-3456

E-mail: T[email protected]

For name and address of your nearest Independent Authorized Service Center,

contact the Ridge Tool Company at (800) 519-3456 or http://www.ridgid.com or

www.seesnake.com

Troubleshooting

SYMPTOM POSSIBLE REASON POSSIBLE SOLUTION

Display turns ON, but does not

show image.

- Loose cable connections.

- Imager head covered by debris.

- Check cable connections, clean if required.

- Re-attach.

- Visually inspect imager head to make certain it is not covered by debris.

LEDs on imager head are dim

at max brightness, display

switches between black and

white, color display turns itself

OFF after a brief period.

Batteries low on power. - Replace batteries.

Unit will not turn ON. -

Dead batteries. - Replace batteries.

1 2 3 4 5 6 7 8 9 10 11 12 ... 61 62

Comments to this Manuals

No comments

Ridgid Seesnake Micro User Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Ridgid Seesnake Micro