Ridgid Seesnake Micro User Manual download pdf (Page 3)

Ridge Tool Company

Tools For The Professional

SeeSnake Micro™

General Safety Information

WARNING! Read these instructions

and the accompanying safety booklet

carefully before using this equipment. If

you are uncertain about any aspect of using this

tool, contact your RIDGID distributor for more

information.

Failure to understand and follow all instructions

may result in electric shock, re, and/or serious

personal injury.

SAVE THESE INSTRUCTIONS!

Work Area Safety

• Keep your work area clean and well lit. Cluttered benches and dark

areas may cause accidents.

• Do not operate electrical devices or visual inspection tool in explo-

sive atmospheres, such as in the presence of ammable liquids,

gases, or heavy dust. Electrical devices or visual inspection tools create

sparks which may ignite the dust or fumes.

• Do not use the visual inspection tool around corrosive chemicals.

Exposure to corrosive, oily environments can ruin the plastic covering on

the imager head and ruin the picture quality.

• Keep bystanders, children, and visitors away while operating visual

inspection tool. Do not let visitors contact the unit.

Personal Safety

• Stay alert, watch what you are doing and use common sense. Do

not use visual inspection tool while tired or under the inuence of drugs,

alcohol, or medications. A moment of inattention while operating tools

may result in serious personal injury.

• Do not overreach. Keep proper footing and balance at all times.

Proper footing and balance enables better control of the tool in unexpec-

ted situations.

• Use safety equipment. Always wear eye protection. Dust mask, non-skid

safety shoes, hard hat, or hearing protection must be used for appropriate

conditions.

• Use proper accessories. Do not place this product on any unstable cart

or surface. The product may fall causing serious injury to a person or

serious damage to the product.

• Prevent object and liquid entry. Never spill liquid of any kind on the

video display unit. Liquid increases the risk of electrical shock and

damage to the product.

• Do not use this device for personal or medical use/inspection in any

way.

• The unit is not shock-resistant. Do not use it as a hammer or drop it.

Battery Precautions

• Remove the batteries when cleaning the unit.

• Remove the batteries before storing the unit for a long time.

• When necessary, REPLACE ALL FOUR BATTERIES in this unit with

new ones.

• Use only the size and type of battery specied.

• Be sure to install the battery with the correct polarity as indicated in

the battery compartment.

• This visual inspection tool is not designed to be used with rechar-

geable batteries.

• Properly dispose of the battery. Exposure to high temperatures can

cause the battery to explode, so do not dispose of in a re. Place

tape over the terminals to prevent direct contact with other objects.

Some countries have regulations concerning battery disposal. Please

follow all applicable regulations.

SeeSnake Micro™ Use and Care

• Use visual inspection tool only as directed. Do not operate the

SeeSnake Micro™ unless the owner’s manual has been read and proper

training has been completed.

• Do not immerse the handheld display unit in water. Store in a dry

place. Such measures reduce the risk of electric shock and damage.

The imager head and the cable are water resistant when the unit is fully

assembled, but the video display unit is not.

• Do not use the camera if condensation forms inside the lens. Let the

water evaporate before using again.

• Do not use tool if ON/OFF switch is not properly working. Any tool

that cannot be controlled with the switch is dangerous and must be

repaired.

• Store idle equipment out of the reach of children and other untrained

persons. Equipment is dangerous in the hands of untrained users.

• Maintain the visual inspection tool with care. Properly maintained

tools are less likely to cause injury.

• If unit is dropped check for breakage of parts, and any other condi-

tions that may affect the tool’s operation. If damaged, have the tool

serviced before using. Many accidents are caused by poorly maintaine

tools.

• Use only accessories that are recommended by the manufacturer

for your tool. Accessories that may be suitable for one tool may become

hazardous when used on another tool.

• Dry your hands before turning the unit ON or OFF and before repla-

cing batteries.

• Protect against excessive heat. The product should be situated away

from heat sources such as radiators, heat registers, stoves or other

products (including ampliers) that produce heat. Do not use the unit near

moving machinery or areas where the temperature will exceed 113°F.

Service

• Tool service must be performed only by qualied repair personnel.

Service or maintenance performed by unqualied repair personnel could

result in injury.

• When servicing a tool, use only identical replacement parts. Follow

instructions in the Maintenance Section of this manual. Use of unau-

thorized parts or failure to follow maintenance instructions may create a

risk of electrical shock or injury.

• Do not attempt to take any pieces of this unit apart unless directed

to by this manual.

• Follow instructions for changing accessories. Accidents are caused

by poorly maintained equipment.

SeeSnake Micro™

Operating Instructions

1 2 3 4 5 6 7 8 ... 61 62

Comments to this Manuals

No comments

Ridgid Seesnake Micro User Manual Page 3

Comments to this Manuals

Related products and manuals for Power tools Ridgid Seesnake Micro