RIDGID R4112 Use and Care Manual download pdf (Page 29)

OPERATION

Fig. 40

RIGHT

WRONG

Fig. 39

Fig. 38

22.5

31.6

22.5

VIEW OF SAW FROM FRONT WITH FENCES

FACING FORWARD

SLIDING

MITER FENCE

FENCE

SCREW

CUTTING WARPED MATERIAL

See Figures 39 - 40.

When cutting warped material, always make sure it is posi-

tioned on the miter table with the convex side against the

fence as shown in figure 40.

If the warped material is positioned the wrong way as shown

in figure 39, it will pinch the blade near the completion of

the cut.

WARNING:

To avoid a kickback and to avoid serious personal

injury, never position the concave edge of bowed

or warped material against the fence.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 111 112

No comments

RIDGID R4112 Use and Care Manual Page 29