RIDGID 1822-I Operator's Manual Page 16
- Page / 79
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
1822-I Pipe and Bolt Threading Machine
Figure 14 – Checking Thread Length
No. 819 Nipple Chuck and
No. 839 Adapter Kit
Installation
1. The machine utilizes No. 819 Nipple Chuck and ex-
isting size adapter. Mounting requires a No. 839
Adapter Kit (Figure 15).
2. Assemble the 819 nipple chuck/839 Adapter Kit as
described in the instructions provided with the kits.
3. Turn control switch to the OPEN position and de-
press foot switch to fully open chuck.
NOTE! Make sure that special front retainer plate is
installed to allow for use of 819 and 839 adapter.
4. Insert the adapted No. 819 Nipple Chuck, tube end
first, into chuck of No. 1822-I Threading Machine. Ro-
tate assembly until key on 839 slides into notch.
Figure 15 – No. 819 and No. 839 Assembly
Ridge Tool Company
14
Nipple Threading Procedure
1. Ream, thread and cut pipe to desired length using
standard procedures.
2. Install No. 819 and 839 adapter (Figure 16).
3. Position insert with small end toward adapter for
1
/
8
″ to
3
/
4
″ pipe, large end toward adapter for 1″ pipe and no
insert for pipe 1
1
/
4
″ and up.
4. Install proper adapter and tighten with wrench.
Remove wrench before starting machine.
5. Screw nipple into adapter, ream and thread other
end (Figure 17). Insert wrench into collar and re-
lease nipple.
Figure 16 – Installation Insert and Adapters
Figure 17 – Installing and Releasing Nipples
W
W
D
D
D
Die
Pipe
Die
Pipe
A - Full Width Die Thread
Starting to Cut Thread
Flush
(Basic Size)
One Turn Large
(Maximum Size)
One Turn Small
(Minimum Size)
Thin Ring
Gage
Completed Thread
Die Flush
With End
of Pipe
B - Checking Threads Within Pipe Gage
No. 819 Nipple Chuck
Front Retainer Plate
Wrench
Insert
Pipe
Adapter
Pin
Retaining
Rings
Nipple Chuck
Insert
Adapter
Wrench
Nipple
Release
Collar
Wrench
WARNING
- Pipe and Bolt 1
- Threading Machine 1
- Table of Contents 2
- Pipe and Bolt Threading 3
- General Safety Information 4
- Specific Safety Information 5
- Standard Equipment 6
- Machine Assembly 7
- Figure 3 – Stand Assembly 8
- Figure 2 – Machine Dimensions 8
- Machine Inspection 10
- Machine and Work Area Set-Up 11
- Operation Using 12
- Machine-Mounted Tools 12
- Die Head 13
- Checking Thread Length 15
- No. 839 Adapter Kit 16
- No. 819 Nipple Chuck and 16
- Operation Instructions 17
- Using Geared Threaders 17
- Changing Dies 18
- Threading 2 18
- ″ to 4″ Pipe (45 RPM) 18
- No. 821 Blade Cutter and 19
- No. 822 Adapter Kit 19
- Left Hand Machine Operation 19
- Accessories 20
- Maintenance Instructions 21
- Spindle Conversion Kit for 22
- Plastic Coated Pipe 22
- Machine Storage 23
- Service and Repair 24
- 1822-IC 25
- Ridge Tool Company 26
- Machine à fileter 1822-I pour 27
- Table des matières 28
- Sécurité personnelle 29
- Sécurité du chantier 29
- Sécurité électrique 29
- Consignes de 30
- Description 31
- Spécifications 31
- Equipements de base : 31
- Accessoires 32
- Têtes de filières et filières 32
- Assemblage de la machine 33
- Inspection de la machine 35
- Préparation de la machine et 36
- Utilisation des outils 37
- Mandrin à raccords n° 819 et 42
- Utilisation des fileteuses 43
- Remplacement des filières 44
- Coupe-tubes à lame n° 821 et 45
- Inversion du sens de rotation 46
- (rotation à gauche) 46
- Entretien 47
- Lubrification de la machine 48
- Ensemble de conversion de 49
- Service après-vente 50
- Stockage de la machine 50
- Máquina Roscadora de tubos 53
- Modelo 1822-I 53
- NO SE RECOMIENDA 55
- Información específica 56
- Descripción, especificaciones 57
- Montaje de la máquina 58
- Figura 3 – Soporte 60
- Revisión de la máquina 62
- Preparación de la máquina y 63
- Empleo de herramientas 64
- Extracción del tubo 66
- Terrajas Modelos 816/817 68
- Mandril Niplero No. 819 y kit 69
- Instrucciones de 70
- Cambio de terrajas 71
- Engranajes No. 141 71
- Funcionamiento de la máquina 73
- Accesorios 74
- Mantenimiento del sistema 75
- Extracción del árbol 76
- Instalación del árbol 76
- Almacenamiento de la máquina 77
- Servicio y reparaciones 77
- 400 Clark Street 79
- Elyria, Ohio 44035-6001 79
Related products and manuals for Sewing machines RIDGID 1822-I
(59 pages)
Sewing machines Ridgid 1210 User Manual
(2 pages)
(2 pages)
Sewing machines Ridgid 300 User Manual
(1 pages)
(1 pages)
Sewing machines Ridgid 1233 User Manual
(8 pages)
(8 pages)
© 2020, manymanuals.com. All rights reserved. | 1.572 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals