RIDGID MS1065LZ Service Manual download pdf (Page 5)

--- 2 ---

4-1. Selling Point Descriptions

(1) Laser guide system (Only the Model C 10FCH2)

Use the laser marker for aligning with the ink line on the

workpiece.

Cutting position can be properly adjusted by aligning the

positioning ink line with the laser line. There is no need to

make a long ink line on the workpiece.

There is no need to lower the motor head to align with the

ink line because the laser marker makes a laser line on the

workpiece. In addition, cutting position can be easily

adjusted because the operator can hold the workpiece with

both hands to move.

Cutting poisition can be easily adjusted because the laser

line can be aligned with an optionally angled ink line.

Even the woekpieces such as crown moldings and base

boards that have decorative surfaces and are difficult to be

made an ink line can be cut just by aligning the laser line

with the ink line on the fence side. The laser line is adjusted

to the width of the saw blade at the time of factory shipment.

Depending upon the user's cutting choice, the laser line can

be aligned with the left side of the cutting width (saw blade)

or the ink line on the right side. Adjust the position of the

laser line according to "8-1. Position Adjustment of Laser

Line" on page 11.

(2) Aggressive tool design

The tool color is gunmetallic silver to give a sturdier image. The circular saw portion is of a powerful, original

and aggressive design.

(3) Soft, vibration reducing grip

The handle grip is comfortable and slip-resistant thanks to the integrally molded rubber. In addition, it reduces

vibration transmitted to the operator's hand. The Models C 10FCH2 and C 10FCE2 are easier to operate.

(4) Lightest weight in 10" class

The Model C 10FCH2 weighs 12 kg (26.5 lbs.) and the Model C 10FCE2 weighs 11.9 kg (26.2 lbs.)

The Models C 10FCH2 and C 10FCE2 are the lightest compound miter saws in the 10" class.

Fig. 1

Fig. 2

Laser line

Ink line

Laser beam

1 2 3 4 5 6 7 8 9 10 ... 66 67

No comments

RIDGID MS1065LZ Service Manual Page 5