RIDGID MS1065LZ Service Manual download pdf (Page 38)

--- 35 ---

Tolerance

0.38/220 (0.016"/8-5/8")

0.4/height of fence (0.016"/height of fence)

0.1 (0.004")

0.4/100 (0.016"/4")

0.2 ( 0.008")

0.1 ( 0.004")

11-7. Lubrication

Advise the customer to lubricate the machine as indicated below at least once a month. Also, prior to applying

lubrication, any sawdust, dirt or other foreign matter should be thoroughly wiped away with a soft cloth.

(1) Swiveling section of the Gear Case [123] and the Hinge [16]

Coat the swiveling and sliding portion of the Gear Case [123] and the Hinge [16] with machine oil.

(2) Vise ass'y section

Coat the screw thread portion of the Knob Bolt M10 x 66 [39] of the Vise Ass'y [38] with machine oil.

(3) Swiveling section of the Turn Table [36] and the Hinge [16]

Coat the swiveling and sliding portion of the Turn Table [36] and the Hinge [16] with machine oil.

11-8. Product Precision

On completion of reassembly, confirm precision tolerances.

Item

Run-out of dummy disc

Squareness between base and fences (A) and (B)

Flatness between fence (A) and fence (B)

Squareness between dummy disc and fences (A) and (B)

Squareness between dummy disc and turn table

Surface alignment of base and turn table

(Use the upper surface of the base as a reference.)

(Unit: mm)

Turn table

Base

Turn table

Base

Fig. 38

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 66 67

No comments

RIDGID MS1065LZ Service Manual Page 38