RIDGID MS1065LZ Service Manual download pdf (Page 29)

--- 26 ---

1. Remove the two Tapping Screws (W/Flange) D4 x 25 (Black) [151] and the four Tapping Screws (W/Flange)

D4 x 20 (Black) [152], then remove the Switch Handle [153]. Remove the wire of the Laser Holder [1] from

the Switching Power Supply [157]. (Only the Model C 10FCH2)

2. Remove the Machine Screw M4 x 8 [114] and the Nylon Clip [112].

3. Remove the two Machine Screws (W/Washers) M5 x 16 [23] and remove the Dust Guide Ass'y [22] from the

Hinge [16].

4. Remove the two Hex. Socket Hd. Bolts M6 x 20 [17] and remove the Laser Holder [1] from the Hinge [16].

Fig. 31

E. Laser marker

Tools required:

• Phillips screwdriver

• Hex. bar wrench 4 mm

• Hex. bar wrench 3 mm

• Long-nose pliers

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 66 67

No comments

RIDGID MS1065LZ Service Manual Page 29