RIDGID WD45500 Owner's Manual download pdf (Page 12)

12

NOTE: The filter is made of high quality

paper designed to stop very small

particles of dust. The filter can be used

for dry pick up or small amounts of liquid.

Handle the filter carefully when removing

to clean or installing it. Creases in the

filter pleats may occur from installation

but will not affect the performance of the

filter.

Maintenance

WARNING: To reduce the risk of

injury from accidental starting,

unplug power cord before changing

or cleaning filter.

Cleaning Vac Filter

Be sure to dry the filter before storing or

picking up dry debris.

IMPORTANT: After cleaning, check the

filter for tears or small holes. Do not use

a filter with holes or tears in it. Even a

small hole can cause a lot of dust to

come out of your Vac.

Replace the filter

immediately.

Blowing Feature

Your wet/dry Vac has the capability to be

used as a blower for yard work, patio

cleanup and workshop applications to

blow sawdust and other debris. Raise the

right cover and install the locking end of

the hose into the blower port.

Operation (continued)

Right

Cover

Blowing

Port

Locking

End of

Hose

Removal

Refer to page 7 "Filter Removal and

Installation" Section of this manual.

IMPORTANT: To avoid damage to the

blower wheel and motor

, always reinstall

the filter before using the V

ac for dry

material pickup.

WARNING: Always wear safety

eyewear complying with ANSI Z87.1

(or in Canada, CSA Z94.3) before

using as a blower.

CAUTION: Wear a dust mask if

blowing creates dust which might

be inhaled.

CAUTION: To reduce the risk of

hearing damage, wear ear protectors

when using the Vac/ blower for

extended time or in a noisy area.

WARNING: To reduce the risk of

injury to bystanders, keep them

clear of blowing debris.

!

!

!

!

!

SP6734 RIDGID WD45500 4.5 Gallon 10/28/09 10:53 AM Page 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comments to this Manuals

No comments