RIDGID TS3650 User Manual download pdf (Page 31)

1. Locate the following hardware:

4 Square Head Bolts,

5/16-18 x 1" Long

4 Serrated Flange Hex Nuts,

5/16-18

2. From the fence guide bar carton

find the following:

1 Front Guide Bar (Long)

3. Insert four 5/16-18 x 1” long square

head bolts into the holes as shown.

4. Attach serrated flange hex nut

loosely, as shown, so the bolt head

protrudes through the front edge of

the table and extension.

5. Slide the front guide bar slot over

each of the square head bolts as

shown and finger tighten the four

nuts.

6. The front guide bar must be aligned

left to right at this time. Align the

7-1/8 inch mark on the right rip

scale with the right edge of the cast

iron table top.

7. Push front guide bar against the

saw table and extensions. Finger

tighten each nut on the table and

extensions. The guide bars will be

aligned and the nuts tightened at a

later time.

WARNING: Front and rear guide

bars must be aligned with blade.

Misaligned guide bars could

twist. Twisted guide bars could

misalign fence. A misaligned

fence could cause binding or

kickback. You could be hit or cut.

Installing Front Rip Fence Guide Bar

Serrated

Flange

Hex Nut

Square

Head Bolt

5/16-18 x 1 In.

Square Head Bolt

5/16-18 Serrated

Flange Hex Nut

.SP6498 Belt Drive Saw 05/03 7/15/03 7:04 AM Page 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 75 76

Comments to this Manuals

No comments

RIDGID TS3650 User Manual Page 31

Comments to this Manuals

Related products and manuals for Power tools RIDGID TS3650