RIDGID R86010B Use and Care Manual download pdf (Page 5)

5 - English

ASSEMBLY

WARNING:

Do not use this product if it is not completely

assembled or if any parts appear to be missing or

damaged. Use of a product that is not properly and

completely assembled or with damaged or missing

parts could result in serious personal injury.

WARNING:

Do not attempt to modify this product or create

accessories not recommended for use with this

product. Any such alteration or modification is

misuse and could result in a hazardous condition

leading to possible serious personal injury.

If any parts are damaged or missing, please call 1-866-539-1710 for assistance.

OPERATION

WARNING:

Do not allow familiarity with tools to make you

careless. Remember that a careless fraction of a

second is sufficient to inflict severe injury.

WARNING:

Always remove battery pack from the tool when

you are assembling parts, making adjustments,

cleaning, or when not in use. Removing battery

pack will prevent accidental starting that could

cause serious personal injury.

WARNING:

Always wear eye protection with side shields

marked to comply with ANSI Z87.1. Failure to do

so could result in objects being thrown into your

eyes, resulting in possible serious injury.

APPLICATIONS

You may use this tool for the purposes listed below:

Driving nuts and bolts using an impact socket

INSTALLING / REMOVING BELT HOOK

See Figure 1, page 8.

 Align hole in belt hook with hole in the housing.

 Install screw to secure belt hook in place.

 To uninstall, remove screw then remove belt hook.

VARIABLE SPEED SWITCH TRIGGER

See Figure 2, page 8.

The variable speed switch trigger delivers higher speed with

increased trigger pressure and lower speed with decreased

trigger pressure.

To turn the tool ON, depress the switch trigger. To turn it

OFF, release the switch trigger and allow the anvil to come

to a complete stop.

NOTE: A whistling or ringing noise coming from the switch

during use is a normal part of the switch function.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

See Figure 2, page 8.

Set the direction of rotation selector in the OFF (center lock)

position to lock the switch trigger and help prevent accidental

starting when not in use.

Position the direction of rotation selector to the left of the

switch trigger for forward operation. Position the selector to

the right of the switch trigger to reverse the direction.

NOTE: The tool will not run unless the direction of rotation

selector is pushed fully to the left or right.

NOTICE:

To prevent gear damage, always allow the anvil

to come to a complete stop before changing the

direction of rotation.

WARNING:

Battery tools are always in operating condition.

Lock the switch when not in use or carrying at your

side, when installing or removing the battery pack,

and when installing or removing sockets.

INSTALLING/REMOVING BATTERY PACK

See Figure 3, page 8.

 To install, lock the switch trigger and insert the battery

pack.

 Make sure the latches on the side of the battery pack

snaps in place and that battery pack is secured in the

product before beginning operation.

 To remove, depress the latches.

LED LIGHTS

See Figure 4, page 8.

The LED lights around the anvil illuminate when either the

switch trigger or grip light switch is depressed.

If the tool is not in use, the time-out feature will cause the

light to start fading and then shut off.

The LED light illuminates only when there is a charged battery

pack in the tool.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

RIDGID R86010B Use and Care Manual Page 5

Comments to this Manuals

Related products and manuals for Power impact wrenches RIDGID R86010B