7 - English
FEATURES
PRODUCT SPECIFICATIONS
Motor ..................................................................12 Volt DC
Switch .............................. VSR (Variable Speed Reversible)
Drill Head:
Chuck ...........................................................3/8 in. Keyless
No Load Speed .....................................0-550 r/min. (RPM)
Torque ................................................................... 120 in.lb.
Ratchet Head:
Drive Shank ............................................................... 3/8 in.
No Load Speed .....................................0-220 r/min. (RPM)
Torque ................................................................... 250 in.lb.
Impact Driver Head:
Coupler ...............................................................1/4 in. Hex
Impacts Per Minute ......................................... 0-3,100 IPM
No Load Speed ..................................0-2,000 r/min. (RPM)
Torque ................................................................... 650 in.lb.
KNOW YOUR JOBMAX
™
KIT
See Figure 1, page 16.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
The power handle has a direction of rotation (forward/
reverse/center lock) selector located below the switch trigger
for changing the direction of bit rotation. Setting the direction
of rotation selector in the OFF (center lock) position will lock
the switch trigger to help reduce the possibility of accidental
starting when not in use.
INTERCHANGEABLE HEADS
The power handle has a variety of interchangeable heads
for use in different job applications.
LED LIGHT
The LED light, located above the switch trigger, illuminates
when the switch trigger is depressed. This provides extra
light for increased visibility.
TRIGGER SAFETY
The trigger will not operate the power handle unless an
accessory head is attached.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
DRILL & IMPACT DRIVER HEADS:
RIGHT ANGLE DESIGN
The right angle head design of the drill and the impact driver
allows you to get into tight work areas for drilling, driving,
and impacting.
DRILL HEAD:
KEYLESS CHUCK
The drill head has a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
IMPACT DRIVER HEAD:
1/4 IN. HEX COUPLER
Quickly and easily change bits without the need for tools.
IMPACTS PER MINUTE
This tool features an impact speed of 0-3,100 BPM (the
number of impacts per minute).
RATCHET HEAD:
3/8 IN. DRIVE SHANK WITH ADAPTOR
The ratchet head has a 3/8 in. drive shank. To use 1/2 in.
sockets, first install the included adaptor on the drive
shank.
(84 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals