RIDGID R3210 User Manual download pdf (Page 19)

OPERATION

TO ADJUST POSITIVE 0° BEVEL STOP

See Figures 16 and 17.

n Unplug the saw.

n Pull bevel adjustment lever upward to release.

n Turn set screw with hex wrench and adjust base until it

is square with the saw blade.

n Securely lock the bevel adjustment lever.

TO ADJUST BEVEL SETTING

See Figure 16.

n Unplug the saw.

n Pull the bevel adjustment lever upward until the motor

housing moves freely.

n Raise the motor housing end of the saw until you reach

the desired angle setting on the bevel scale (0-45°).

Note: Pull the adjustment lever all the way up to set the

angle at 51.5°. To reach the 51.5° bevel setting, push

the 51.5° bevel button shown in figure 16.

n Press downward on the bevel adjustment lever until the

motor housing is securely locked in place.

Fig. 17

SET

SCREW

Fig. 16

BEVEL

ADJUSTMENT

LEVER

51.5° BEVEL

BUTTON

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

RIDGID R3210 User Manual Page 19