RIDGID OL50145MW Operator's Manual download pdf (Page 3)

GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure

to follow all instructions listed below may result

in electric shock, fire, and/or serious personal

injury.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents. Floor must not

be slippery from wax or dust.

Do not operate power tools in explosive atmospheres,

such as in the presence of flammable liquids, gases,

or dust. Power tools create sparks which may ignite the

dust or fumes.

Keep bystanders, children, and visitors away while oper-

ating tools. Distractions can cause you to lose control.

Operate air compressor in an open area at least 18 in.

away from any wall or object that could restrict the

flow of fresh air to ventilation openings.

ELECTRICAL SAFETY

Avoid body contact with grounded surfaces such as

pipes, radiators, ranges, and refrigerators. There is an

increased risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of elec-

tric shock.

Do not abuse the cord. Never use the cord to carry the

tool or pull the plug from an outlet. Keep cord away

from heat, oil, sharp edges, or moving parts. Replace

damaged cords immediately. Damaged cords increase

the risk of electric shock.

When operating a power tool outside, use an outdoor

extension cord marked “W-A” or “W”. These cords are

rated for outdoor use and reduce the risk of electric shock.

PERSONAL SAFETY

Eye protection which conforms to ANSI specifications

and provides protection against flying particles both

from the FRONT and SIDE should ALWAYS be worn

by the operator and others in the work area when

loading, operating, or servicing this tool. Eye protection

is required to guard against flying fasteners and debris,

which could cause severe eye injury.

The employer and/or user must ensure that proper

eye protection is worn. We recommend a Wide Vision

Safety Mask for use over eyeglasses or standard safety

glasses that provide protection against flying particles

both from the front and side. Always use eye protection

which is marked to comply with ANSI Z87.1.

Additional safety protection will be required in some

environments. For example, the working area may

include exposure to a noise level which can lead to hear-

ing damage. The employer and user must ensure that any

necessary hearing protection is provided and used by the

operator and others in the work area. Some environments

will require the use of head protection equipment. When

required, the employer and user must ensure that head

protection marked to comply with ANSI Z89.1 is used.

Stay alert, watch what you are doing, and use common

sense when operating a power tool. Do not use tool

while tired or under the influence of drugs, alcohol,

or medication. A moment of inattention while operating

power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry.

Contain long hair. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes, jewelry, or long

hair can be caught in moving parts.

Do not overreach. Keep proper footing and balance

at all times. Proper footing and balance enables better

control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection.

Dust mask, nonskid safety shoes, hard hat, or hearing

protection must be used for appropriate conditions.

Do not use on a ladder or unstable support. Stable

footing on a solid surface enables better control of the

tool in unexpected situations.

TOOL USE AND CARE

Do not exceed the pressure rating of any component

in the system.

Protect material lines and air lines from damage or

puncture. Keep hose and power cord away from sharp

objects, chemical spills, oil, solvents, and wet floors.

Check hoses for weak or worn condition before each

use, making certain all connections are secure. Do not

use if defect is found. Purchase a new hose or notify an

authorized service center for examination or repair.

Release all pressures within the system slowly. Dust

and debris may be harmful.

Store idle tools out of the reach of children and other

untrained persons. Tools are dangerous in the hands of

untrained users.

Maintain tools with care. Follow maintenance instruc-

tions. Properly maintained tools are easier to control.

Check for misalignment or binding of moving parts,

breakage of parts, and any other condition that may

affect the tool’s operation. If damaged, have the tool

serviced before using. Many accidents are caused by

poorly maintained tools.

Never point any tool toward yourself or others.

 Keep the exterior of the air compressor dry, clean, and

free from oil and grease. Always use a clean cloth when

cleaning. Never use brake fluids, gasoline, petroleum-

based products, or any strong solvents to clean the unit.

Following this rule will reduce the risk of deterioration of

the enclosure plastic.

SERVICE

Tool service must be performed only by qualified

repair personnel. Service or maintenance performed by

unqualified personnel may result in a risk of injury.

Disconnect power supply, open drain valve to decom-

press tanks and allow water to drain, and allow air

compressor to become cool to the touch before

servicing. Turn pressure regulator knob fully clockwise

after shutting off compressor.

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

RIDGID OL50145MW Operator's Manual Page 3

Comments to this Manuals

Related products and manuals for Air compressors RIDGID OL50145MW