11.25
DIAGNOSTICS, INSPECTION & LOCATING
SeekTech
®
Utility Line Locators
The large displays on SeekTech receivers give you the information you need when you need to locate with speed, accuracy and confidence.
Target Line
Current Strength/Signal Angle
Signal Strength
Left/Right Guidance Arrows
Depth/Distance
Proximity Signal
Performance
The mapping display confirms a good locate signal and identifies distortion in congested areas using:
• Target-Line – Guides the operator down the line and shows changes in direction.
• Left-Right Guidance Arrows – Points the operator to the target utility.
• Proximity Signal and Signal Strength – Helps the operator center the locator closer to the target for more confident locates.
Other Features
• Continual Depth – Increases productivity by showing depth changes in real-time.
• Omni-Seek
®
– Increases accuracy and eciency when searching in passive mode. Continuously searches passive power and
radio bands to locate and avoid unknown metallic lines.
• User-Defined frequencies – RIDGID SeekTech receivers can be configured with up to 30 user-defined frequencies.
– SeekTech SR-60 locator can be set to any frequency between 10 Hz and 93.000 Hz making it a universal receiver.
– SeekTech SR-20 locator can be set to any frequency between 10 Hz and 35.000 Hz.
Comparison of Features
SR-20 Locator SR-60 Locator Conventional
Omni-Directional Mapping Display Yes Yes No
User Defined Frequencies
(Competitor Frequencies)
Yes -
up to 35kHz
Yes -
Up to 93kHz
Limited or No
Omni-Seek
®
(Simultaneous Multiple Line Trace)
Yes -
All Passive Bands at Once
Yes -
All Passive Bands at Once
No
Depth Continual Continual Push Button or Triangulation
Current Measurement Continual Continual Push Button & Average
Distortion Indication On One Screen Yes Yes No
Simultrace
™
(Simultaneous Sonde & Line Trace)
No Yes No
Stereo Guidance (Using Headphones) No Yes No
Comments to this Manuals