Ridgid FINISH STAPLER R150FSA User Manual download pdf (Page 5)

SPECIFIC SAFETY RULES

AIR SUPPLY AND CONNECTIONS

n �Do not use oxygen, combustible gases or bottled

gases as a power source for this tool as tool will

explode, possibly causing injury or death.

n Do not use with an air compressor which can poten-

tially exceed 200 P.S.I. as tool may burst, possibly

causing injury.

n The connector on the tool must not hold pressure

when air supply is disconnected. If an incorrect fitting

is used, the tool can remain charged with air after discon-

necting and thus will be able to drive a fastener even after

the air line is disconnected, possibly causing injury.

n Always disconnect air supply:

• Before making adjustments

• When servicing the tool

• When clearing a jam

• When tool is not in use

• When moving to a different work area, as accidental

actuation may occur, possibly causing injury.

LOADING TOOL

n Do not load the tool with fasteners when any one of

the operating controls is activated.

When loading tool:

n Never place a hand or any part of body in fastener

discharge area of tool.

n Never point tool at anyone.

n Do not pull the trigger or depress the workpiece

contact as accidental actuation may occur, possibly

causing injury.

SAVE THESE INSTRUCTIONS

n Refer to them frequently and use them to instruct others

who may use this tool. If you loan someone this tool, loan

them these instructions also.

1 2 3 4 5 6 7 8 9 10 ... 19 20

No comments

Ridgid FINISH STAPLER R150FSA User Manual Page 5