Press ToolWARNING!Read this Operator’s Manualcarefully before using thistool. Failure to understandand follow the contents ofthis manual may result in
Figure 7 – Placing Scissor-Style Jaw Set Around FittingFigure 8 – RP 210 Tool Square To Tubing7. Make sure the jaws and tool are square to the tubing.
Figure 11 – Pressure Release ButtonInspecting The Pressed Connection1. Inspect the pressed fitting. If the fitting is supplied witha control ring and/
AccessoriesWARNINGThe following tool accessories have been designedto function with the RP 210 Press Tools. Otheraccessories suitable for use with oth
DisposalThe RBRC™ (Rechargeable BatteryRecycling Corporation) Seal on thebattery packs means that RIDGIDhas already paid the cost of recyclingthe lith
12RP 210 Press ToolRP 210 Diagnostic CodesLED Status Description IconGreenGlows Tool ON.Blinks Out of acceptable voltage range.— Replace battery with
iiRP 210 Press ToolTable of ContentsRecording Form For Machine Serial Number ...
RP 210 Press ToolRecord Serial Number below and retain product serial number which is located on nameplate.SerialNo.Press ToolRP 210Test Equipment Dep
2RP 210 Press ToolGeneral Safety Rules*WARNINGRead all safety warnings and instructions. Failure to followthe warnings and instructions may result in
Ridge Tool Company 3Personal Safety• Stay alert, watch what you are doing and use com-mon sense when operating a power tool. Do notuse a power tool wh
Battery And Charger Safety WARNINGRead the battery charger manual before using thecharger or batteries. Failure to read, understand andfollow the cont
NOTE! RIDGID jaws and attachments are offered in two“series”• Standard Series• Compact SeriesThese series are not interchangeable. Only stan-dard seri
properly inspect and maintain attachments and charg-ers can result in serious injury and property damage.5. Check that the warning label is present an
Ridge Tool Company 7Pressing A Fitting With Typical ScissorJaws1. Make sure the RP 210 Press Tool has the correct jawinstalled. (See Tool And Work Are
Comments to this Manuals