Ridgid R2720 User Manual download pdf (Page 15)

WARNING:

To prevent the possibility of sawdust or foreign

objects being thrown into your face and eyes,

never attempt to use the sander without dust bag

properly installed. Sawdust or foreign objects

being thrown into your face and eyes could result

in possible serious injury.

DUST BAG

See Figure 11.

The dust bag provides a dust collection system for the sander.

It should be installed over the exhaust hole located on the

side of the sander. For more efficient operation, empty dust

bag when half full.

Do not connect sander to power supply before installing

dust bag.

To install/remove dust bag:

n Unplug the sander.

n Place the opening of dust bag over exhaust hole of the

sander, aligning the notch inside opening of dust bag with

groove on exhaust hole. The bag should be installed with

the zipper down when sander is in upright position.

n Turn the dust bag counterclockwise to secure in place.

n To remove the dust bag, turn clockwise and pull off.

To empty dust bag:

Remove dust bag from sander, open zipper, and shake out

dust.

DUST BAG

DUST

EXHAUST

GROOVE

DUST BAG

OPENING

TURN TO SECURE

DUST BAG

WARNING:

Do not use the dust collection bag when sanding

metal. Using the dust collection bag when sanding

metal creates a fire hazard, which could damage

the tool and lead to serious personal injury.

WARNING:

Collected sanding dust from sanding surface

coatings such as polyurethanes, linseed oil, etc.,

can self-ignite in the sander dust collection bag

or elsewhere and cause fire. To reduce the risk

of fire, always empty the dust bag frequently

while sanding and never store or leave a sander

without totally emptying its dust bag. Also

follow the recommendations of the coatings

manufacturers.

OPERATION

Fig. 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Ridgid R2720 User Manual Page 15

Comments to this Manuals

Related products and manuals for Grinding machines Ridgid R2720