RIDGID WD4550 Owner's Manual download pdf (Page 7)

NOTE: If filter cage or float ever have to

be replaced, follow the instructions below

for proper assembly:

1. Grasp the drum latches on both the right

and left side of the power head. Slowly

pull the drum latches away from the

drum. Lift the power head off the drum.

Place the lid assembly of the vac upside

down on a clean, dry surface.

2. Remove the filter nut and the filter.

3. Use a flat blade screwdriver and insert

the blade near one of the tabs between

the filter cage and the center ring of the

lid. Pry the tab out of the slot. Tilt the

cage and lift away from the lid.

4. Place the float over the opening in the

center of the lid with the words “This

side toward lid” laying face down over

the hole.

5. Line up filter cage tabs with the slots in

the center ring of the lid assembly. Push

on the filter cage until the tabs snap into

the slots for a secure fit.

7

WARNING: For your own safety,

never connect plug to power source

outlet until all assembly steps are

complete and you have read and

understood the safety and operation

instructions. Do not operate vac with

any parts damaged or missing.

WARNING: To avoid personal injury

or damage to vac be sure to keep

hands, fingers, or any other foreign

objects out of the center opening

when assembling the float .

Float/Cage Replacement

Filter

Cage

Slots (3)

Tabs (3)

Filter

Cage

Float

Labeled

End

Tabs (3)

Slots (3)

THIS SIDE

TOWARD LID

Drum Latches

(2)

Flexible

Locking

Tab

Pull

Out

And

Lift Up

SP6609 8/25/05 2:02 PM Page 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 47 48

Comments to this Manuals

No comments