RIDGID WD0935 Owner's Manual download pdf (Page 6)

Vac Assembly (continued)

Insert the flexible plastic end of the hose,

which is opposite the swivel end, into the

vacuum port.

Place the utility nozzle securely on the

swivel end of the hose and the vac is

ready for use.

NOTE: The swivel end of the hose is

removable if more hoses need to be

attached for more length from the vac. To

remove the swivel portion of the hose,

grasp the hose swivel and firmly pull it out

of the flexible hose. Connect the soft end

of a second hose (accessory #VT-2507)

into the swivel end of the original hose by

forcing the sections together until they fit

tightly. You can also connect two hoses

together by purchasing VT2511 (Hose to

Hose connector).

Cord Storage

Simply, wrap the power cord around the

powerhead (as shown) and snap the con-

nector on the plug to a wrap of the cord.

Operation

WARNING

To reduce the risk of fire or explosion, do not operate this vac in areas with

flammable gases, vapors or explosive dust in the air. Flammable gases or

vapors include but are not limited to; lighter fluid, solvent type cleaners, oil-

base paints, gasoline, alcohol or aerosol sprays. Explosive dusts include but

are not limited to; coal, magnesium, grain or gun powder. Do not vacuum

explosive dust, flammable or combustible liquids or hot ashes. Do not use

this vac as a sprayer. To reduce the risk of health hazards from vapors or

dusts, do not vacuum toxic materials.

CAUTION: To reduce risk of hearing

damage wear ear protectors when

using the vac for extended hours or

when using it in a noisy area. The

operation of any utility vac can result

in foreign objects being blown into

the eyes, which can result in severe

eye damage. Always wear safety

goggles complying with ANSI Z87.1

(or in Canada CSA Z94.3-99) shown

on Package before commencing

operation. Safety Goggles are avail-

able at many local retail stores.

To reduce the risk of electric shock, this

appliance has a polarized plug (one blade

is wider than the other). This plug will fit in

a polarized outlet only one way. If the plug

does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a quali-

fied electrician to install the proper outlet.

Do not change the plug in any way.

After you plug the power cord into the out-

let, turn the unit on by pushing the switch

from position “O” to position “l”. The sym-

bols used on the motor cover are interna-

tional “On & Off” symbols. “O” is the

symbol for “OFF” and “l” is the symbol for

“ON”.

Familiarize yourself with the accessories

included with the vac. Each accessory

may be used in various ways for vacuum-

ing and blowing debris. Here is a list of the

accessories and their uses.

Cord Wrap

Area

Dust

Utility

Nozzle

Hose

Caster Feet

w/Accessory

Storage

On-Off Switch

Power Cord

Drum

Handle

Casters

=OFF

=ON

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comments to this Manuals

No comments

RIDGID WD0935 Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Vacuum cleaners RIDGID WD0935