RIDGID metal detector User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
www.metaldetectors.co.uk
Metal Detectors
1 Angela Street
Mill Hill, Blackburn
BB2 4DJ
t: +44 (0)1254 55887
f: +44 (0)1254 676901
If you are experiencing any problems not covered by the above see opposite page for details of our warranty / repair service.
On inland sites, this effect is known as 'negative'.
With this type of ground effect, the normal faint
threshold signal required to commence a search,
disappears as the search head is lowered to the
ground. Maintaining a constant height between
the search head and the ground reduces this
effect.
On beaches, a 'positive' ground effect is
experienced. This is caused by the conductivity
of the ground in salt-water areas. When this
effect occurs, the threshold signal becomes
louder as the search head is lowered to the
ground. Applying some discrimination will reduce
the effect of 'positive' ground.
Effects of Temperature
The VIKING 6 is a highly sensitive instrument
and therefore can be affected by variations in
temperature. Whilst the detector is extremely
stable in constant temperatures, it can take up to
15 minutes to acclimatise. For example, if it has
been in a hot car and is then brought into a
cooler climate for use, THRESHOLD drift may be
experienced until the circuit cools down to the
ambient temperature of its surroundings. Similar
effects may be experienced if the detector is
operated in the shade and then brought out into
bright sunlight. In cases of drift, momentarily
pressing the RETUNE pushbutton will bring the
detector back to THRESHOLD.
3
Problem Possible Cause Remedy
No sound from speaker Battery Check battery is good &
inserted correctly
Headphones connected Remove headphones
Unit does not detect Incorrect Tuning Hold RETUNE pushbutton
and adjust TUNING
controlErratic Operation
Cable detection Wrap cable snugly round
shaft
Battery Check battery is good &
inserted correctly
Threshold Drift Sudden Temperature Change Allow detector time to
acclimatise.
Page view 2
1 2 3 4 5

Comments to this Manuals

No comments