RIDGID metal detector User Manual download pdf (Page 10)

®

10

Eriez’ E-Z Tec Narrow Profile

Liquid Line Metal Detectors are used

to detect the presence of ferrous,

nonferrous and stainless metal

contaminants in viscous products such

as liquids, slurries, syrups, pastes and

many other pumped products.

When metal is detected in the product

flow, a reject signal is channeled to one

of the available output relays. The

output relay can be used to activate a

ball valve, control a visual or audio

alarm, or send a signal to a PLC.

In addition to enhancing product purity,

Eriez Liquid Line Systems can protect

vital downstream equipment from metal

in the product stream. Complete

systems can be provided in pipe sizes

ranging from one–inch (25 mm) to six–

inch (150 mm) diameter.

Eriez can provide either analog

electronics with manual adjustment for

sensitivity, gain, phase and reject

output timing or a micro processor

version (MPC) that provides a 99

product memory with individual

settings for each product. In addition,

the micro processor version provides a

visual reject report on the LCD screen,

or a permanent record can be retrieved

from a printer via the RS232 and

RS485 communications ports and a

separate direct printer output port.

Liquid Flow Model

FEATURES

• Stainless steel sensing head, USDA/

FDA/Dairy and CSA approved

• Remote electronics in a NEMA–4X

stainless steel enclosure with up to

100 feet (30 meters) of cable.

• “Kynar” nonmetallic pipe with

transitions to suit customer’s

requirements.

• Stainless steel reject valve, full port,

ball type, air activated (90 psi/6.2 bar).

• Stainless steel square tubular

continuous welded support frame.

• Air combo consisting of filter, gauge

and solenoid.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments