RIDGID ZRR9651 Use and Care Manual download pdf (Page 11)

11 - English

MAINTENANCE

WARNING:

When servicing use only identical RIDGID®

replacement parts. Use of any other parts can

create a hazard or cause product damage.

WARNING:

Always wear eye protection with side shields

marked to comply with ANSI Z87.1. Failure to do

so could result in objects being thrown into your

eyes resulting in possible serious injury.

WARNING:

To avoid serious personal injury, always remove

the battery pack from the tool when cleaning or

performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most

plastics are susceptible to damage from various types of

commercial solvents and may be damaged by their use. Use

clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline,

petroleum-based products, penetrating oils, etc.,

come in contact with plastic parts. Chemicals can

damage, weaken or destroy plastic which can

result in serious personal injury.

BATTERY PACK REMOVAL AND PREPARATION

FOR RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals

with heavy-duty adhesive tape. Do not attempt to

destroy or disassemble battery pack or remove

any of its components. Lithium-ion and nickel-

cadmium batteries must be recycled or disposed

of properly. Also, never touch both terminals with

metal objects and/or body parts as short circuit

may result. Keep away from children. Failure to

comply with these warnings could result in fire

and/or serious injury.

CHUCK REMOVAL

See Figures 14 - 16, page 15.

The chuck may be removed and replaced by a new one.

Lock the switch trigger by placing the direction of rotation

selector in center position.

Insert a 5/16 in. or larger hex key into the chuck of the

drill and tighten the chuck jaws securely.

Tap the hex key sharply with a mallet in a clockwise di-

rection. This will loosen the screw in the chuck for easy

removal.

Open the chuck jaws and remove the hex key. Using a

screwdriver, remove the chuck screw by turning it in a

clockwise direction.

NOTE: The chuck screw has left hand threads.

 Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap sharply with a mallet in a counterclock-

wise direction. This will loosen the chuck on the spindle.

It can now be unscrewed by hand.

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on the spindle and develop a

wobble. Also, the chuck screw may become loose, causing

the chuck jaws to bind and prevent them from closing.

To tighten:

Lock the switch trigger by placing the direction of rotation

selector in the center position.

 Open the chuck jaws.

Insert the hex key into the chuck and tighten the chuck

jaws securely. Tap the hex key sharply with a mallet in

a clockwise direction. This will tighten the chuck on the

spindle.

Open the chuck jaws and remove the hex key.

Tighten the chuck screw.

NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 13

AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comments to this Manuals

No comments

RIDGID ZRR9651 Use and Care Manual Page 11

Comments to this Manuals

Related products and manuals for Cordless combi drills RIDGID ZRR9651